AC200MAX EP500 for BLUETTI 2 Pin Right Angle Aviation Female Connector 15A Power Input Waterproof IP68 14AWG Wire Cable Plug

The part needed to help with solar installation.

As another reviewer pointed out, the solder cups are not big enough for 10AWG wire, which you really need in order to fully take advantage of the 35A power output on a Bluetti power station.However, I just need to power a pair of 7 watt LED lights, and this connector is perfect for that job. In fact, I like this setup enough that I will probably add a couple of other accessories on this circuit, along with a DC switch box.Note that this will NOT work properly with the AC200P power station. The AC200P uses a quick-connect type jack, which is spring loaded, rather than the threaded connector. You can shove the plug in to the AC200P, but it doesn't lock in place, and it's a tight fit. I'd recommend a different plug for the AC200P.Also, note the polarity! If you are plugging into the 12V DC outlet, you need the connector with the male pins. If you are plugging into the solar input, you need the plug with the female jack. So be alert and make sure you purchase the correct connector (unlike the person who rated one * because he didn't look before buying.)

Could use an instruction picture that it threads apart for soldering

12g wire does not fit inside the small soldering cups and definitely does not insert past the cup, which it should in order to make a strong connection. My entire RV solar setup is contingent on this wire making this connection and it appears that it’s meant for 16g wire.

Beware, if you are attempting to establish a proper 30 amp circuit using 10 awg wire, the cup terminals used inside this connector are way too small. I asked this very question of the seller prior to purchase and was assured that the connector would work fine with 10 gauge wire. Frustrating and a waste of my time!

Connettore perfetto per prelevare i 12 volt dal mio AC 500 Bluetti

Perfekt till min Bluetti AC200Max installerad som fast strömförsörjning i min van.

BuongiornoIl connettore è adatto anche per collegare, senza tutta la cavetteria in dotazione, i pannelli solari all'AC200P.

Well made, connector solder buckets are small for the rated current, I surrounded the connector with a barrel crimp and filled that with solder to allow a larger cable to be attached.

Gut. Das Verlöten ist nicht ganz einfach.